Finite Element Analysis of the Wind - Uplift Resistance of Roof Edge Components

Abstract

Wind-induced damages on low-slope roofs are a major and common problem that many buildings located in high wind areas suffer from. Most of these damages are initiated when the metal roof edge fails first, leading to overall roof failure. This is because peak wind pressures occur at the edges and corners of low-slope roof buildings. Currently, there are not enough wind design guidelines for the Canadian roofing community to quantify the dynamic wind uplift resistance of the roof edge system. The objective of this research is to evaluate the effect of wind-induced loads on roof edges using a finite element model, verify the numerical results with those obtained from controlled experiments, and perform parametric investigations for various design variables. In this research, the overall roof edge system was modelled using the commercial finite element software package ABAQUS, by simulating the roof edge system with shell elements and applying a uniform static pressure against the face of the edge cleat or coping. Results of the modelling were compared to the experimental ones in terms of deflection of the coping under uniform pressure. The results of the numerical model and the experiments show a good agreement. Furthermore, a parametric analysis of the system was conducted under the effect of varying parameters. i.e., coping gauge, nail spacing, coping and cleat length and wind and thermal load application.