Distortional Static and Buckling Analysis of Wide Flange Steel Beams

Description
Title: Distortional Static and Buckling Analysis of Wide Flange Steel Beams
Authors: Pezeshky, Payam
Date: 2017
Abstract: Existing design provisions in design standards and conventional analysis methods for structural steel members are based on the simplifying kinematic Vlasov assumption that neglects cross-sectional distortional effects. While the non-distortional assumption can lead to reasonable predictions of beam static response and buckling strength in common situations, past work has shown the inadequacy of such assumption in a number of situations where it may lead to over-predicting the strength of the members. The present study thus develops a series of generalized theories/solutions for the static analysis and buckling analysis of steel members with wide flange cross-sections that capture distortional effects of the web. Rather than adopting the classical Vlasov assumption that postulates the cross-section to move and rotate in its own plane as a rigid disk, the present theories assume the web to be flexible in the plane of the cross-section and thus able to bend laterally, while both flanges to move as rigid plates within the plane of the cross-section to be treated as Euler-Bernouilli beams. The theories capture shear deformation effects in the web, as well as local and global warping effects. Based on the principle of minimum potential energy, a distortional theory is developed for the static analysis of wide flange steel beams with mono-symmetric cross-sections. The theory leads to two systems of differential equations of equilibrium. The first system consists of three coupled equilibrium differential equations that characterize the longitudinal-transverse response of the beam and the second system involves four coupled equilibrium differential equations of equilibrium and characterizes the lateral-torsional response of the beam. Closed form solutions are developed for both systems for general loading. Based on the kinematics of the new theory, two distortional finite elements are then developed. In the first element, linear and cubic Hermitian polynomials are employed to interpolate displacement fields while in the second element, the closed-form solutions developed are adopted to formulate special shape functions. For longitudinal-transverse response the elements consist of two nodes with four degree of freedom per node for longitudinal-transverse response and for lateral-torsional response, the elements consist of two nodes with eight degrees of freedom per node. The solution is able to predict the distortional deformation and stresses in a manner similar to shell solutions while keeping the modeling and computational effort to a minimum. Applications of the new beam theory include (1) providing new insights on the response of steel beams under torsion whereby the top and bottom flanges may exhibit different angles of twist, (2) capturing the response of steel beams with a single restrained flange as may be the case when a concrete slab provides lateral and/or torsional restraint to the top flange of a steel beam, and (3) modelling the beneficial effect of transverse stiffeners in reducing distortional effects in the web. The second part of the study develops a unified lateral torsional buckling finite element formulation for the analysis of beams with wide flange doubly symmetric cross-sections. The solution captures several non-conventional features. These include the softening effect due to web distortion, the stiffening effect induced by pre-buckling deformations, the pre-buckling nonlinear interaction between strong axis moments and axial forces, the contribution of pre-buckling shear deformation effects within the plane of the web, the destabilizing effects due to transverse loads being offset from the shear centre, and the presence of transverse stiffeners on web distortion. Within the framework of the present theory, it is possible to evoke or suppress any combination of the features and thus isolate the individual contribution of each effect or quantify the combined contributions of multiple effects on the member lateral torsional capacity. The new solution is then applied to investigate the influence of the ratios of beam span-to-depth, flange width-to-thickness, web height-to-thickness, and flange width-to-web height on the lateral torsional buckling strength of simply supported beams and cantilevers. Comparisons with conventional lateral torsional buckling solutions that omit distortional and pre-buckling effects quantify the influence of distortional and/or pre-buckling deformation effects. The theory is also used to investigate the influence of P-delta effects of beam-columns subjected to transverse and axial forces on their lateral torsional buckling resistance. The theory is used to investigate the load height effect relative to the shear centre. Comparisons are made with load height effects as predicted by non-distortional buckling theories. The solution is adopted to quantify the beneficial effect of transverse stiffeners in controlling/suppressing web distortion in beams and increasing their buckling resistance.
URL: http://hdl.handle.net/10393/36074
http://dx.doi.org/10.20381/ruor-20354
CollectionThèses, 2011 - // Theses, 2011 -
Files