An Investigation Into the SiO2 Impregnation of Spruce Wood Under Vacuum Conditions for Engineering Applications

Abstract

Wood is a widely used construction material that has many advantageous properties, and some drawbacks. These drawbacks are mainly associated with the porous vascular structure of wood that makes it a high water-absorbent material. In addition, wood’s properties alter substantially with respect to the moisture content. Amongst the treatment techniques that limit the water uptake capacity of wood, vacuum-aided impregnation has exhibited promising results. However, little research has explored the effect of key parameters (such as the vacuum pressure) on the effectiveness of the impregnation. This study aims to optimize the performance of SiO2 impregnation of spruce wood under vacuum pressures. The main objective of this research is to overcome wood’s weakness by reducing its water uptake capacity through a vacuum-aided impregnation technique and study its effect on the physico-mechanical properties of wood under dry and saturated conditions. The study was conducted in two parts. In the first part, wood samples underwent impregnation under atmospheric and three vacuum pressures. Density measurements, water uptake tests, microscopy examination, thermogravimetric analysis, and dynamic mechanical analysis were conducted on non-treated and SiO2-treated samples. Quantitative and qualitative analyses demonstrated that SiO2 impregnation performed under -90 kPa was able to effectively enhance the wood’s properties compared to the other conditions. The SiO2 impregnation under high vacuum pressure demonstrated an effective increase in the density of the wood and achieved a significant reduction in the water uptake capacity. The analysis of the wood’s viscoelastic properties revealed that SiO2 impregnation under atmospheric and vacuum conditions triggered two different reinforcing mechanisms: a solid film, causing stick-slip oscillation, and particle diffusion, causing particle-particle and particle-lumen wall friction, respectively. For the second part, characterization methods such as Impact test, DMA, SEM, EDS, Porosity, and SAXS tests were conducted on non-treated and -90 kPa treated spruce wood samples in dry, saturated, and submerged states in order to reveal the synergistic effect of the SiO2 impregnation pressure and water uptake on the wood’s properties. The results showed that high vacuum impregnation pressure has a significant positive reinforcing effect on the wood’s properties. It increased the impact resistance of wood in dry and saturated conditions. A high vacuum impregnation was able to overcome the softening effect of water and caused a significant increase in the Storage modulus by strengthening the wood’s vascular structure, which accordingly increased the wood’s capacity to absorb energy. High vacuum impregnation was also able to counteract the plasticizing effect of water and significantly increased the Loss modulus by increasing the internal friction in the wood with the diffusion of the nanoparticles in the wood’s cell walls and vascular structure. This phenomenon increased the wood's capacity to absorb and dissipate energy under dry and submerged conditions.