Carbon Dioxide Gas Separation from Syngas to Increase Conversion of Reverse Water Gas Shift Reaction via Polymeric and Mixed Matrix Membranes

Abstract

Membranes are a promising, effective and energy efficient separation strategy for effluent gases in the Reverse Water Gas Shift (RWGS) reaction to increase the overall conversion of CO2 to CO. This process involves a separation and recycling process to reuse the unreacted CO2 from the RWGS reactor. The carbon monoxide produced from this reaction, alongside hydrogen (composing syngas), can be used in the Fischer-Tropsch process to create synthetic fuel, turning stationary CO2 emissions into a useable resource. A literature review was performed to select suitable polymers with high CO2 permeability and selectivities of CO2 over CO and H2. PDMS (polydimethylsiloxane) was selected and commercial and in-house PDMS membranes were tested. The highest CO2 permeability observed was 5,883 Barrers, including a CO2/H2 selectivity of 21 and a CO2/CO selectivity of 9, with ternary gas feeds. HY zeolite, silica gel and activated carbon were selected from previous research for their CO2 separation capabilities, to be investigated in PDMS mixed matrix membranes in 4 wt % loadings. Activated carbon in PDMS proved to be the best performing mixed matrix membrane with a CO2 permeability of 2,447 Barrers and comparable selectivities for CO2/H2 and CO2/CO of 14 and 9, respectively. It was believed that swelling, compaction and the homogeneity of the selective layer were responsible for trends in permeability with respect to driving force. The HY and silica gel mixed matrix PDMS membranes were believed to experience constraints in performance due to particle and polymer interfaces within the membrane matrix.