Repository logo

A Novel Method of Characterizing Polymer Membranes Using Upstream Gas Permeation Tests

dc.contributor.authorAl-Ismaily, Mukhtar
dc.contributor.supervisorKruczek, Boguslaw
dc.date.accessioned2011-12-05T17:28:22Z
dc.date.available2011-12-05T17:28:22Z
dc.date.created2011
dc.date.issued2011
dc.degree.disciplineGénie / Engineering
dc.degree.levelmasters
dc.degree.nameMASc
dc.description.abstractCharacterization of semi-permeable films promotes the systematic selection of membranes and process design. When acquiring the diffusive and sorption properties of gas transport in non-porous membranes, the time lag method is considered the conventional method of characterization. The time lag method involves monitoring the transient accumulation of species due to permeation on a fixed volume present in a downstream reservoir. In the thesis at hand, an alternative approach to the time lag technique is proposed, termed as the short cut method. The short cut method appoints the use of a two reservoir system, where the species decay in the upstream face of the membrane is monitored, in combination with the accumulation on the downstream end. The early and short time determination of membrane properties is done by monitoring the inflow and outflow flux profiles, including their respective analytical formulas. The newly proposed method was revealed to have estimated the properties at 1/10 the required time it takes for the classical time lag method, which also includes a better abidance to the required boundary conditions. A novel design of the upstream reservoir, consisting of a reference and working volume, is revealed, which includes instructional use, and the mechanics involved with its operation. Transient pressure decay profiles are successfully obtained when the reference and working volumes consisted of only tubing. However when tanks were included in the volumes, large errors in the decay were observed, in particular due to a non-instantaneous equilibration of the pressure during the start up. This hypothesis was further re-enforced by examining different upstream tank-based configurations. iii In the end, a validated numerical model was constructed for the purpose of simulating the two reservoir gas permeation system. A modified form of the finite differences scheme is utilized, in order to account for a concentration-dependent diffusivity of penetrants within the membrane. Permeation behavior in a composite membrane system was disclosed, which provided a new perspective in analyzing the errors associated with the practical aspect of the system.
dc.embargo.termsimmediate
dc.faculty.departmentGénie chimique et biologique / Chemical and Biological Engineering
dc.identifier.urihttp://hdl.handle.net/10393/20463
dc.identifier.urihttp://dx.doi.org/10.20381/ruor-5076
dc.language.isoen
dc.publisherUniversité d'Ottawa / University of Ottawa
dc.subjectGas Permeation
dc.subjectPermeability
dc.subjectGas Diffusion
dc.subjectConstant Volume System
dc.subjectTime Lag
dc.subjectPressure Decay
dc.titleA Novel Method of Characterizing Polymer Membranes Using Upstream Gas Permeation Tests
dc.typeThesis
thesis.degree.disciplineGénie / Engineering
thesis.degree.levelMasters
thesis.degree.nameMASc
uottawa.departmentGénie chimique et biologique / Chemical and Biological Engineering

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail ImageThumbnail Image
Name:
Al-Ismaily_Mukhtar_2011_thesis.pdf
Size:
2.2 MB
Format:
Adobe Portable Document Format
Description:
Main Thesis Article

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail ImageThumbnail Image
Name:
license.txt
Size:
4.21 KB
Format:
Item-specific license agreed upon to submission
Description: