Optimal Shape Design for Polymer Electrolyte Membrane Fuel Cell Cathode Air Channel: Modelling, Computational and Mathematical Analysis

dc.contributor.authorAl-Smail, Jamal Hussain
dc.description.abstractHydrogen fuel cells are devices used to generate electricity from the electrochemical reaction between air and hydrogen gas. An attractive advantage of these devices is that their byproduct is water, which is very safe to the environment. However, hydrogen fuel cells still lack some improvements in terms of increasing their life time and electricity production, decreasing power losses, and optimizing their operating conditions. In this thesis, the cathode part of the hydrogen fuel cell will be considered. This part mainly consists of an air gas channel and a gas diffusion layer. To simulate the fluid dynamics taking place in the cathode, we present two models, a general model and a simple model both based on a set of conservation laws governing the fluid dynamics and chemical reactions. A numerical method to solve these models is presented and verified in terms of accuracy. We also show that both models give similar results and validate the simple model by recovering a polarization curve obtained experimentally. Next, a shape optimization problem is introduced to find an optimal design of the air gas channel. This problem is defined from the simple model and a cost functional, $E$, that measures efficiency factors. The objective of this functional is to maximize the electricity production, uniformize the reaction rate in the catalytic layer and minimize the pressure drop in the gas channel. The impact of the gas channel shape optimization is investigated with a series of test cases in long and short fuel cell geometries. In most instances, the optimal design improves efficiency in on- and off-design operating conditions by shifting the polarization curve vertically and to the right. The second primary goal of the thesis is to analyze mathematical issues related to the introduced shape optimization problem. This involves existence and uniqueness of the solution for the presented model and differentiability of the state variables with respect to the domain of the air channel. The optimization problem is solved using the gradient method, and hence the gradient of $E$ must be found. The gradient of $E$ is obtained by introducing an adjoint system of equations, which is coupled with the state problem, namely the simple model of the fuel cell. The existence and uniqueness of the solution for the adjoint system is shown, and the shape differentiability of the cost functional $E$ is proved.
dc.publisherUniversité d'Ottawa / University of Ottawa
dc.subjectShape optimization, PEM fuel cell cathode optimal design of air channel, polarization curve, shape differentiability, existence and uniqueness
dc.subjectShape optimization
dc.subjectPEM fuel cell cathode optimal design of air channel
dc.subjectpolarization curve
dc.subjectshape differentiability
dc.subjectexistence and uniqueness
dc.titleOptimal Shape Design for Polymer Electrolyte Membrane Fuel Cell Cathode Air Channel: Modelling, Computational and Mathematical Analysis
dc.faculty.departmentMathématiques et statistique / Mathematics and Statistics
dc.contributor.supervisorBourgault, Yves
dc.degree.disciplineSciences / Science
thesis.degree.disciplineSciences / Science
uottawa.departmentMathématiques et statistique / Mathematics and Statistics
CollectionThèses, 2011 - // Theses, 2011 -

Al-Smail_Jamal_2012_thesis.pdfJamal Hussain Al-Smail's PhD thesis in Mathematics6.75 MBAdobe PDFOpen